Cpu Configuration; Chipset - Asus AT4NM10-I User Manual

2.4.1

CPU Configuration

The items in this menu show the CPU-related information that the BIOS automatically
detects.
CPU TM function [Enabled]
Enables or disables Intel
function. When enabled, the CPU core frequency and voltage are reduced when the CPU
overheats. Configuration options: [Disabled] [Enabled]
Execute-Disable Bit Capability [Enabled]
Allows you to enable or disable the No-Execution Page Protection Technology. Setting this
item to [Disabled] forces the XD feature flag to always return to zero (0). Configuration
options: [Disabled] [Enabled]
Hyper Threading Technology [Enabled]
Allows you to enable or disable the Intel
[Disabled] [Enabled]
2.4.2

Chipset

The Chipset menu allows you to change the advanced chipset settings. Select an item then
press <Enter> to display the sub-menu.
North Bridge Configuration
DRAM Frequency [Auto]
Allows you to set the DDR2 operating frequency. Configuration options: [Auto] [667MHz]
[800MHz]
Configure DRAM Timing by SPD [Enabled]
Allows you to enable or disable configuring the DRAM Timing by SPD.
Configuration options: [Enabled] [Disabled]
Initiate Graphic Adapter [IGD]
Allows you to decide which graphics controller to use as the primary boot device.
Configuration options: [IGD] [PCI/IGD]
Video Function Configruation
DVMT Mode Select [DVMT Mode]
Allows you to select the DVMT mode. Configuration options: [DVMT Mode]
DVMT/FIXED Memory [256MB]
Configuration options: [128MB] [256MB] [Maximum DVMT]
2-7
CPU Thermal Monitor (TM) function, a CPU overheating protection
®
Hyper Threading technology. Configuration options:
®
Chapter 2: BIOS information