Using The Setup Wizard To Auto-Detect The Internet Connection - NETGEAR DM111PSP - ADSL2+ Ethernet Modem User Manual

• Quick Setup. You are prompted to configure the Internet connection and LAN settings. See
"Using Quick Setup to Configure the Modem Router" on page

Using the Setup Wizard to Auto-Detect the Internet Connection

To use the Setup Wizard to assist with configuration or to view the Internet connection settings:
1. Select Setup Wizard from the main menu, and the following screen displays:
Figure 1-3
2. To use the Setup Wizard, select Yes, and then click Next.
The Setup Wizard detects your ISP configuration. Depending on the type of connection, you
are prompted to enter your ISP settings, as shown in the following table.
Table 1-1. Auto-Detected Internet Connection Types
Connection Type
PPP over Ethernet (PPPoE)
PPP over ATM (PPPoA)
Dynamic IP Account Setup
IP over ATM Classical IP
assignment (RFC1577)
Configuring Your Internet Connection
ADSL2+ Modem Router DM111PSPv2 User Manual
ISP Information
Enter the login user name and password. These fields are case-
sensitive.
No entries are needed.
• Enter the assigned IP address, subnet mask, and the IP address of
your ISP's primary DNS server. If a secondary DNS server address is
available, enter it also.
• DNS servers are required to perform the function of translating an
Internet name such as
a fixed IP address configuration, you must obtain DNS server
addresses from your ISP and enter them manually here.
v1.0, December 2008
1-6.
to a numeric IP address. For
www.netgear.com
1-5