AVG 8.5 FILE SERVER EDITION - V 85.5 User Manual page 117

 Scanning parameters - in the list of scanning parameters you can switch
on/off specific parameters as needed. By default, most of the parameters are
switched on and these will be used automatically during scanning.
 Scan process priority - you can use the slider to change the scanning
process priority. By default, the priority is set to medium level (Automatic
scan) that optimizes the scanning process speed and the use of system
resources. Alternatively, you can run the scanning process slower which
means the system resources load will be minimized (useful when you need to
work on the computer but you do not care so much how long the scanning
takes), or faster with increased system resources requirements (e.g. when the
computer is temporarily unattended).
 Set additional scan reports - the link opens a new Scan Reports dialog
where you can select what types of possible findings should be reported:
117