Referenced Documents; Related Documents; Structure Of This Manual; Chapter 1 Introduction - Tandberg Data SDLT220-320 PRODUCT Product Manual

CHAPTER 1: Introduction

1.2 Referenced Documents

Super DLT SCSI Interface Guide (432614 rev. 01 or later)
•
Super DLT Design and Integration Guide (432588 rev. 01 or later)
•
Super DLTtape™ Interactive Library Interface Specification
•

1.3 Related Documents

DLT Script Tool User Guide
•

1.4 Structure of this Manual

Chapter 1, Introduction, is the chapter you are currently reading.
•
Chapter 2, SDLT 220/320 Product Information, describes various features
•
of the SDLT technology and the modular design used to build this exciting
product.
Chapter 3, Drive Specifications, lists various specifications for the tape
•
system: product, functional, environmental, and recording media.
Chapter 4, Installing Your Tape Drive, contains handling and pre-
•
installation guidelines, configuration advice, plus mounting and installation
information for your SDLT tape drive.
Chapter 5, Using Your Tape Drive, contains information on running the self-
•
test, descriptions of the front panel controls and LEDs, updating the firmware
(microcode), and various pointers for caring for your SDLT tape drive.
Chapter 6, SCSI Description, provides a high-level description of the logical
•
interface to the tape system.
Chapter 7, Regulatory Compliance, describes various regulations that apply
•
to the SDLT tape drive.