Configuration; Ethernet Configuration - Ricoh AP610N - Aficio B/W Laser Printer Setup Manual

Ethernet Configuration

Make the following network settings
according to the network interface
you are using.
You can use SmartDeviceMonitor for
Admin or a Web browser to make IP
address-related settings in a TCP/IP-
capable environment.
Important
❒ Configure the printer for the net-
work using the control panel.
❒ The following table shows the con-
trol panel settings and their default
values. These items appear in the
[Host Interface] menu.
Setting Name
DHCP
IP Address
Subnet Mask
Gateway Address
Frame Type (NW)
Active Protocol
Ethernet Speed
LAN Type
Note
❒ If DHCP is in use, "IP Address",
"Subnet Mask", and "Gateway
Address" are all set automatically.
❒ Make this setting only when it is
necessary. See Software Guide.

5. Configuration

Value
On
011.022.033.044
000.000.000.000
000.000.000.000
Auto
TCP/IP Active
NetWare Active
SMB Active
Apple-
Active
Talk
Auto
Ethernet
A
Press the {Menu} key.
The [Menu] screen appears on the
display.
B
Press the {U} or {T} key to dis-
play [Host Interface] menu, and
then press the {# Enter} key.
Menu:
Host Interface
The interface setting menu ap-
pears.
C
Press the {U} or {T} key to dis-
play [Network Setup], and then
press the {# Enter} key.
The network setup menu appears.
D
Press the {U} or {T} key to dis-
play [Active Protocol], and then
press the {# Enter} key.
AGN503S
61