Ricoh AP610N - Aficio B/W Laser Printer Setup Manual page 53

I
Attach the Bluetooth interface unit.
Insert the end of the Bluetooth in-
terface unit to the opening ( ), and
then push down until it clicks ( ).
J
Fasten the network interface unit
to the controller board with the
two screws.
Attaching Bluetooth Interface Unit Type C
K
With the side labeled INSERT
facing up, slowly insert the card
into the interface unit, until it
stops.
ZKGX420E
L
Match the controller board to the
top and bottom rail using the "T"
mark, and then slide it into the
printer slowly until it stops.
ZKGX431E
M
Push back the handle of the con-
troller board until it clicks.
ZKGX442E
3
ZKGX070E
ZKGX601E
ZKGX380E
49