Installing Updated Drivers In Macintosh; Uninstall Procedure; Install Procedure - Xerox 3117 - Phaser B/W Laser Printer Upgrade Instructions

Version 0.2
October 2009

Installing updated drivers in Macintosh

Uninstall Procedure

Follow steps below to uninstall the driver for Macintosh.
1. Make sure that the machine is connected to your computer and powered on.
2. Insert the supplied software CD into your CD-ROM drive.
3. Double-click CD-ROM icon that appears on your Macintosh desktop.
Note: If you have misplaced your original CD-ROM, you can initiate the uninstall procedure
from the downloaded archive obtained from
click on the downloaded .dmg file and follow the instructions below.
4. Double-click the MAC_Installer folder.
5. Double-click the Installer OS X icon.
6. Enter the password and click OK.
7. The Xerox Installer window opens. Click Continue.
8. Select Uninstall and click Uninstall.
9. When the message which warns that all applications will close on your computer appears,
Click Continue.
10. When the uninstall is done, click Quit.

Install Procedure

1. Download the latest drivers and utilities from http://www.support.xerox.com/.
2. The downloaded file is in the .dmg format. Double click on it to open the virtual disk image.
3. Once the disk image file is opened, Double-click the MAC_Installer folder.
4. Double-click the Installer OS X icon.
5. Enter the password and click OK.
6. The Xerox Installer window opens. Click Continue.
7. Select Easy Install and click Install. Easy Install is recommended for most users. All
components necessary for machine operations will be installed.
If you select Custom Install, you can choose individual components to install.
8. The message which warns that all applications will close on your computer appears. Click
Continue.
9. After the installation is finished, click Quit.
Page 4 of 8
http://support.xerox.com . Simply double-