Configuring The Ipv6 Settings - Ricoh Aficio SP 3500N Software Manual

5. Monitoring and Configuring the Printer

Configuring the IPv6 Settings

Click the [IPv6 Configuration] tab on the network settings page to configure the IPv6 settings.
IPv6
Item
IPv6
IPv6 Address
Item
DHCP
IP Address (DHCP)
Stateless Address
Gateway Address
Link-local Address
Manual Configuration
Address
Prefix Length
Gateway Address
78
Select whether to enable or disable IPv6. You cannot disable IPv6 using
Web Image Monitor if the printer is currently in use in an IPv6 environment.
In this case, use the control panel to disable [IPv6] under [Network Setting].
When disabled, [DHCP], [Manual Configuration Address], [Prefix Length],
and [Gateway Address] below cannot be configured.
Select whether or not the printer obtains its IPv6 address from a DHCP
server.
Displays the IPv6 address obtained from the DHCP server when [DHCP] is
set to [Active].
Displays up to four stateless auto addresses.
Displays the printer's default gateway address.
Displays the link local address of the printer. The link local address is an
address that is valid only inside the local network (local segment).
Enter the printer's IPv6 address. Can contain up to 39 characters.
Enter the prefix length using a value between 0 and 128.
Enter the default gateway's IPv6 address. Can contain up to 39 characters.
Description
Description