Model-Specific Information
This section explains how you can identify the model type and region of your machine.
This printer comes in two models that have different duplex functions.
When describing procedures that are model-specific, this manual refers to the different printer models as
Type 1 or Type 2. The following table describes the model types.
Model types
Model type
Type 1
Type 2
Furthermore, there is a label on the right side of the machine, located in the position shown below. The
label contains details that identify the region your machine belongs to. Read the label.
The following information is region-specific. Read the information under the symbol that corresponds to
the region of your printer.
(mainly Europe and Asia)
If the label contains the following, your printer is a region A model:
• CODE XXXX -22, -27
• 220-240V
(mainly North America)
If the label contains the following, your printer is a region B model:
• CODE XXXX -17
• 120 V
• Dimensions in this manual are given in two units of measure: metric and inch. If your printer is a
Region A model, refer to the metric units. If your printer is a Region B model, refer to the inch units.
8
Model name
SP 3500N
SP 3510DN
CMC003
Duplex Printing
Manual
Automatic