5. Monitoring and Configuring the Printer
Item
Device E-mail Address
Server Timeout
(seconds)
Configuring the POP3 Settings
Click the [POP3] tab on the network settings page to configure the POP3 settings.
POP3 Settings
Item
POP3 Server
User Account
User Password
Authentication
84
Enter the system administrator's e-mail address.
This address is used as the sender's address of alert e-mail messages sent
from this printer. Can contain up to 64 characters.
Enter the number of seconds the printer waits before considering an SMTP
operation to have timed out (1 to 999).
Enter the IP address or host name of the POP3 server for authentication. The
POP3 server specified here will be used for [POP before SMTP]. Can
contain up to 64 characters.
Enter the user name for logging in to the POP3 server. Can contain up to 32
characters.
Enter the password for logging in to the POP3 server. Can contain up to 32
characters.
Select an authentication method from the following:
[None]: Password will not be encrypted.
[APOP Authentication]: Password will be encrypted.
[Auto]: Password will be encrypted or not encrypted according to the POP3
server's settings.
Description
Description