Advertisement
How to Add Fluid
Refer to the Maintenance Schedule to determine what
kind of transaxle tluid t o use. See "Recommended
Fluids and Lubricants" in the Index.
If the fluid level is low, add only enough of the proper
fluid to bring the level i n t o the cross-hatched area
on the
dipstick.
I . Pull
o u t
the dipstick.
3.
Check both sides
of the
dipstick, and read
the lower
level.
The fluid level must be in the cross-hatched
area.
4. If the fluid level is in the acceptable range, push the
dipstick back in all the way.
2. Using
a
long-neck funnel, add enough fluid at the
dipstick hole t o bring it to the proper level. It doesn't
take much tluid, generally less than a pint
(0.5L).
Dol7
't o\vrfi//.
We recommend you use only fluid
labeled DEXRON@-111, because fluid with that label
is
made especially for your automatic transaxle.
Damage caused by fluid other than DEXRON@-I11
is not covered by your new vehicle warranty.
0
After adding fluid, recheck the fluid level as
described under "How to Check."
0
When the correct fluid level is obtained, push the
dipstick back in a l l the way.
6-16
Advertisement
