Advertisement
5 .
6.
7.
8.
9.
You have only 15 seconds beiween each of the
following steps.
Press MIN and "000" will appear on the display.
Press MIN again and hold until the last two digits of
your code appear.
Press and hold HRS until the first digit or digits of
your code appear.
Press AM-FM after you make sure the code matches
the one you wrote down. 'YEP' will appear on the
display, meaning you must repeat steps 5 through 7 .
After you repeat the steps, press AM-FM. SEC
should appear on the display, meaning your system is
secured. When your ignition is off, the
THEFTLOCK light will flash.
Store the paper with your code written on it in a safe
place.
Unlocking the System
If battery battery power is removed for any reason, LOC
will appear on the display when power
is
reapplied. You
will need to enter your code to unlock the system. You
have only 15 seconds between each of the following
steps.
1. Turn the ignition on. LOC will appear on the display.
2. Press MTN and "000" will appear on the display.
3. Press MIN again and hold until the last two digits of
your code appear.
4. Press and hold HRS until the first digit or digits of
your code appear.
5. Press AM-FM after you make sure the code matches
the one you wrote down. SEC should appear on the
display, meaning you can now use your system, and
it
is secured.
3-18
Advertisement
