Advertisement
Playing a Cassette Tape
The longer side of the cassette with the tape visible
should face to the right. The tape will begin playing as
soon as you insert it. If you hear nothing or hear a
garbled sound, the tape may not be in squarely. Press
EJECT to remove the tape and start over.
While the tape is playing, use the VOL, FADE, BAL,
TREB and BASS controls just as you do for the radio.
Other controls may have different functions when a tape
is inserted. The display will show an arrow
to show the
side of the tape playing.
If you want to insert a tape when the ignition or radio is
off, first press EJECT or RCL. Note that cassette tape
adapter kits for portable compact disc players will not
work in your cassette player. These adapters will cause
an error message in the display, and the adapter cassette
will be ejected.
SEEK: Press the forward or backward arrow
to search
for the next or previous selection on the tape. Your tape
must have at least three seconds of silence between each
selection for SEEK to work.
REVERSE (3): Press this button to reverse the tape
rapidly. Press it again to return to playing speed. The
radio will play while the tape reverses.
FORWARD (4):
Press this button to advance quickly to
another part of the tape. Press the button again to return
to playing speed. The radio will play while the tape
advances.
SIDE (5):
Press this button to change the side of the
tape that is playing.
00
(6): Press this button to select or deselect Dolby@ B
Noise Reduction to reduce background noise. The
display will show either OFF or ON for a few seconds
when you press the button.
Dolby'@ B Noise Reduction is manufactured under
license from Dolby Laboratories Licensing Corporation.
Dolby and the
OUR'
symbol are trademarks of Dolby
Laboratories Licensing Corporation.
EJECT Press this button to remove the tape. The radio
will play.
CLN: This message may appear on the display. If it
does, your cassette tape player needs to be cleaned. It
will still play tapes, but you should clean it as soon as
possible to prevent damage to your tapes and player. See
"Care of Your Cassette Tape Player" in the Index. After
you clean the player, press and hold EJECT for five
seconds to reset the CLN indicator.
"-
-
-"
will appear
in
the display to show the indicator was reset.
3-11
Advertisement
