If your vehicle has this
aluminum wheel, you may
have plastic wheel nut caps.
Use the wheel nut wrench to
remove the wheel nut caps
and to loosen the wheel
nuts.
When reinstalling the decorative nut caps, tighten the
caps snug with the wheel wrench, then continue 1/8
rotation for steel caps and 1/4 rotation for plastic caps.
If your vehicle has wire
wheel covers, remove them
as follows:
Use the wire wheel key
wrench to remove the wheel
cover.
Using the flat end of the key
wrench handle, between
the
wire wheel cover and the
center cap, pry off the
center cap.
5-22