Advertisement
Electronic Touch Climate Control System
If your Buick has this climate control system, the
following information tells you how it works.
OFF: The ventilation system always allows fresh air to
flow through your Buick when the vehicle is moving.
The system will try to keep the air at a previously
chosen temperature. When the system is off, the blower
fan is also off.
RECIRC: The amount of fresh air entering the vehicle
is limited when RECIRC is selected. This is helpful
when you are trying to cool the air in your vehicle or
limit the air entering the vehicle for some other reason.
To turn off RECIRC press the button again. If you select
FRONT defrost or BLEND while RECIRC is selected,
the system will automatically turn off RECIRC to
prevent fogging.
TEMPERATURE: Moving the TEMPERATURE lever
changes the temperature of the air coming through your
outlets. Moving the lever between COOL and WARM
will lower or raise the temperature.
3f
FAN: The FAN control is used to select the speed
of the blower fan. There are four speeds to choose from.
Moving the lever between LOW and HIGH will
decrease or increase the fan speed. The fan will be off
when the system is off.
VENT For mild outside temperature, when little
heating or cooling is needed, use the VENT setting. Air
will flow through the middle instrument panel outlets.
Use the air outlets to adjust and direct the air flow.
Adjust the temperature lever to the desired temperature.
The air conditioning compressor is not working when
VENT is selected.
BLEND: When BLEND is selected the air flow will be
split between the windshield and the floor outlets. The
air conditioning compressor will be operating. Adjust
the temperature and fan speed for your comfort.
3-6
Advertisement
