Advertisement
AM-FM Stereo Radios with Automatic
Tone Control
Playing the Radio
Press the VOLUME knob to turn the system on and off.
VOLUME: Turn this knob clockwise to increase
volume. Turn it counterclockwise to decrease volume
RECALL: Press this button briefly
to
recall the station
being played or the clock display. To change what is
normally shown on the display (station or time), press
the button until you see the display
you
want, then hold
the button until the display flashes. If you press the
button when the ignition is off, the clock will show for a
few seconds.
Finding a Station
AM-FM: Press this button to get AM, FM 1 or FM2.
The display shows your selection.
TUNE: Press the up or down arrow
to
choose radio
SEEK: Press
the up or down arrow to go to the next
higher or lower station. The sound will be muted while
seeking.
If your Buick has a radio with Automatic Tone Control, stations.
the instructions below will explain how to use the radio.
To find out if your radio has Automatic Tone Control,
look for a TONE button. If the system has one, you have
Automatic Tone Control. If not, see the systems
explained earlier in this section.
SCAN: Press
one
of the SEEK arrows
for
two
seconds,
and SCAN will appear in the display. Use SCAN to
listen to stations for a few seconds. The radio will go to
3-12
Advertisement
