Installation And Set-Up; Choose A Suitable Site For The Base Unit; Connect The Mains Power Lead; Plug The Main Adaptor Into Your Wall Socket - iDect X3 User Manual

Installation and Set-up

1
Choose a suitable site
for the base unit
(see page 3).
2
Connect the mains
power lead and the
telephone line cord
into the base unit.
Plug one end of the
telephone line cord into
the socket on the back of
the base.
3
Plug the main adaptor into your wall
socket. If you have one or more charger
pods, plug the mains adaptors accordingly.
Make sure that the 230VAC, 50hz mains socket is switched OFF
when you plug the mains adapter into the socket. Switch it ON only
when you have the adaptor plugged in safely.
iDECT Help Line(for UK only): 0845 345 9677 (Local Call rate)
5