Read First Before Use; And Charger Pod; And Base Unit - iDect X3 User Manual

Read First Before Use

Choosing a site The base unit and charger pod(s) should be placed on
for the base unit level surface, in a position where:

and charger pod

the mains adapter plug will reach an easily accessible
230-VAC switched mains supply socket - never try to
lengthen the mains power cable.
the base unit's telephone line cable will reach your
telephone line socket or extension socket (the charger
pod does not have a telephone line connection).
it is not close to another telephone - this can cause
radio interference.
it is not close to a sink, bath or shower, or anywhere
else where it might get wet.
it is not close to other electrical equipment - fridges,
washing machines, microwave ovens, fluorescent
lights, televisions etc.
if the base comes into contact with liquids, disconnect
it promptly and use a soft cloth to dry it; if you believe
that the liquid has seeped into the unit, do not reconnect
the base station. Contact the IDECT Helpline. Follow
the same procedure for your handset to remove
the internal batteries.
it is away from hot, humid conditions and strong sunlight.
Radio signals Signal range between the handset and the base station is in
between handset accordance with the approved standard for DECT phones:

and base unit

Maximum range: 300 metres outdoors.
Maximum range: 50 metres indoor.
The signal range could become lower under exceptional
conditions, such as: metallic doors, reinforced concrete,
radio or electrical interferences, etc.
For stronger radio signal, it is recommended that your
telephone is at the highest possible position. If there is
no radio signal reception, Base 1 message and the signal
level icon will flash on the display.
iDECT Help Line(for UK only): 0845 345 9677 (Local Call rate)
3