Cleaning And Care; Declaration Of Conformity - iDect X3 User Manual

Cleaning and care

Do not clean any part of your iDECT X3 with benzene,
thinner or other solvent chemicals this may cause
permanent damage which is not covered by the
Guarantee. When necessary, clean it with a damp
cloth.
Keep your iDECT X3 away from hot, humid conditions
or strong sunlight, and don't let it get wet.
Every effort has been made to ensure high standards of
reliability for your iDECT X3. However, if something
does go wrong, please do not try to repair it yourself
consult your supplier or the IDECT Helpline.

Declaration of conformity

The DECT cordless phone, identified as iDECT X3,
complies with the essential protective requirements and
objectives of:
EC R&TTE Directive 1999/5/EC
EC Low Voltage Directive 93/68/EEC
And conforms to the following relevant harmonized
standards:
Radio: EN 301406 (TBR 6)
EMC: EN 301489
Safety: EN 60950, EN 41003
The conformity to the requirements is validated by the
symbol.
NOTE: In compliance with Directive 2002/96/EC, when
you purchase a product that comes with the symbol
shown on the right, you are required to dispose the
electrical and electronic equipment by separate waste
collection and you cannot dispose of the product as
normal waste. This equipment and all its components,
subsystems and consumable materials formed an
integral part of this product and when you decide to
dispose them, you have to bring them to the local
recycling centres for appropriate waste disposal, in
compliance with the current regulations. Details about
the location of these centres can be obtained from you
local authority.
44