iDect X3 User Manual page 44

"I cannot make a The handset's keypad may be locked. Unlock it before
call."
you make a call.
Only one handset (or the base unit) can be connected to
the outside line at once. If another handset is already
using the line, you need to wait until it's finished its call.
"When I press keys, Make sure the batteries are fitted in your handset. If the
nothing happens." Battery Level symbol on the display shows 'low', put your
handset back on the cradle for it to charge.
"When I key in a Try a different position for the base unit somewhere
number, it appears higher if possible, or further from other electrical
on the display, but I equipment.
can not make an
Try moving the handset closer to the base unit.
outside call."
"The phone does Check that the base unit's mains power adapter is
not ring." plugged in and power is switched on. The base unit
needs mains power for normal operation of the phone not
just for charging the batteries.
Make sure you are using the telephone line cable that
was supplied with your iDECT X3. Other telephone line
cables might not work.
"My call was cut off Move the handset closer to the base unit before you try
when I went out of again to make a call.
range. Now I can't
use my handset."
"There is Move the handset closer to the base unit, or to a different
interference and position.
noise on the line."
Try moving the base unit so that it's not near other
electrical equipment, such as a television or a computer.
You'll get the best sound if you place the base unit as
high as possible. For example, in a two-storey house,
the first-floor landing is an ideal place.
"I hear 'beeps' from You may be going out of range of the base unit. Move
my handset while closer or your call may be cut off.
I'm on a call."
Check the Battery Level symbol on the display. If it's low,
recharge the batteries.
iDECT Help Line(for UK only): 0845 345 9677 (Local Call rate)
41