Universal Setup - Dell 2330d - Laser Printer B/W User Manual

Universal Setup

From this You can:
menu:
Units of Specify the height, width, and feed direction of the Universal Paper Size.
Measure
Inches* (US)
Millimeters* (non-US)
Portrait Set the portrait width of the universal media.
Width
3–48 inches
76–1219 mm
NOTE:
width allowed.
NOTE:
0.01-inch increments.
NOTE:
increased in 1-mm increments.
Portrait Set the portrait height of the universal media.
Height
3–48 inches
76–1219 mm
NOTE:
height allowed.
NOTE:
0.01-inch increments.
NOTE:
increased in 1-mm increments.
Feed Specify the feed direction of the Universal Paper Size.
Direction
Short Edge*
Long Edge
NOTE: Feed Direction only appears if the longest edge of the media is shorter
than the Maximum Physical Width of the printer.
*Factory default setting
Reports
Mode Mode Main Menu
Reports Menu Settings Page
Device Statistics
Network Setup Page
Profiles List
Print Fonts
Print Directory
If the width exceeds the maximum, the printer uses the maximum
12 inches is the US factory default setting. Inches can be increased in
305 mm is the international factory default setting. Millimeters can be
If the height exceeds the maximum, the printer uses the maximum
19 inches is the US factory default setting. Inches can be increased in
483 mm is the international factory default setting. Millimeters can be