Dell 2330d - Laser Printer B/W User Manual page 41

1. From the menu list, use the Arrow buttons
2. Press the Select button
3. Press the Right Arrow button
.
4. Use the Arrow buttons
5. When the setting you want appears on the display, press the Select button
Quality Mode Main Menu
From You can:
this
menu:
Print Specify the printed output resolution.
Resolution
1200 dpi*
4800 CQ
Pixel Approximate a high-resolution printer font and allow a rough
Boost preview of how the page would look when printed.
Off*
Fonts Only
Fonts/Images
Fonts/Images 2
Toner Lighten or darken printed output and conserve toner.
Darkness
Ranges 1–5
4*
Select a lower value for finer line width, lighter grayscale images,
and lighter printed output.
Select a higher value for bolder line widths or darker grayscale
images.
NOTE:
Selecting a smaller number can help conserve toner.
Enhance Enable a print mode preferable for files such as architectural
Fine Lines drawings, maps, electrical circuit diagrams, and flow charts.
Off*
On
NOTE: This setting is available only on the PCL emulation driver,
PostScript emulation driver, or on the printer Embedded Web
Server.
Gray Automatically adjust the contrast enhancement applied to images.
Pixel Boost
Toner Darkness
Enhance Fine Lines
Gray Correction
Brightness
Contrast
.
until the heading you want appears on the display, and then press the Select button
to scroll through the available menu items.
to scroll to the Quality menu.
to save the setting.