Dell 2330d - Laser Printer B/W User Manual page 34

Advanced Status
Protocol
Honor Init
Parallel Mode 2
MAC Binary PS
Parallel With ENA
Use the Parallel menu to change printer settings on jobs sent through a parallel port.
1. From the menu list, use the Arrow buttons
2. Press the Select button
3. Press the Right Arrow button
.
4. Use the Arrow buttons
5. When the setting you want appears on the display, press the Select button
Parallel Mode Main Menu
From this You can:
menu:
PCL Set the printer to automatically switch to PCL emulation when a print job requires it,
SmartSwitch regardless of the default printer language.
On*
Off
PS Set the printer to automatically switch to PS emulation when a print job requires it,
SmartSwitch regardless of the default printer language.
On*
Off
NPA Mode Send print jobs to the printer and query printer status information at the same time.
Off
On
Auto*
Parallel Assign a size to the parallel input buffer.
Buffer
Auto*
Disabled
3K to <maximum size allowed> (in 1K increments).
Advanced Enable bidirectional communication through the parallel port.
Status
On*
Off
Protocol Specify the parallel interface protocol.
Receive information at a much higher transmission rate if the printer is set to
Fastbytes (if computer supports Fastbytes), or receive information at a normal
transmission rate if the printer is set to Standard.
to scroll the Parallel menu.
.
until the heading you want appears on the display, and then press the Select button
to scroll through the available menu items.
to save the setting.