Setup Mode - Dell 2330d - Laser Printer B/W User Manual

Setup Mode

Main Menu
Setup
1. From the menu list, use the Arrow buttons
2. Press the Select button
3. Press the Right Arrow button
.
4. Use the Arrow buttons
5. When the setting you want appears on the display, press the Select button
Use the Setup menu to configure how the printer formats the end of a line depending on the computer system being used.
Setup Mode Main Menu
From You can:
this
menu:
Printer Define the default printer language used to communicate data from the
Language computer to the printer.
PS Emulation
PCL Emulation*
Print Area Modify the logical and physical printable area.
Normal*
Whole Page
Download Specify the storage location for downloaded resources.
Target
RAM*
Flash
NOTE: Download Target appears only if flash option is installed.
Resource Specify whether all permanent downloaded resources, such as fonts and
Save macros stored in RAM, are saved if the printer receives a job that
requires more memory than is available.
Off*—The printer retains downloaded resources only until memory is
needed. It then deletes those resources associated with the inactive
printer language.
On—The printer retains all downloaded resources for all printer
languages during language changes and printer resets. If the printer
runs out of memory, 38 Memory Full appears.
*Factory default setting
Finishing Mode
Mode Main Menu
Printer Language
Print Area
Download Target
Resource Save
.
until the heading you want appears on the display, and then press the Select button
to scroll through the available menu items.
to scroll to the Setup menu.
to save the setting.