Installing An Optional Memory Card - Dell 2330d - Laser Printer B/W User Manual

a. Click Start® Control Panel.
b. Double-click Printers and Other Hardware.
c. Double-click Printers and Faxes.
7. Right-click the Dell 2330d/2330dn Laser Printer icon.
8. Click Properties.
9. Click Install Options.
10. Click Ask Printer.
11. Click OK.
12. Click OK, and then close the Printers folder.

Installing an Optional Memory Card

The system board has one connector for an optional memory card. The printer can support up to 160 MB for a non-network
printer and 288 MB for a network printer. The printer memory can only be upgraded using 128 MB memory cards for both
network and non-network printers. The network printer can also be upgraded using 256 MB memory cards.
CAUTION: If you are installing a memory card after setting up the printer, turn off the printer, and unplug
the power cable before continuing.
1. Turn the printer off.
2. Open the memory access door on the right side of the printer.
NOTICE: Do not remove the memory card or touch the printer near the area of the memory card while actively
reading, writing, or printing from these devices. Data corruption can occur.
3. Push open the latches on both ends of the memory connector.
NOTICE:
Memory cards are easily damaged by static electricity. Touch a grounded metal surface before you
touch a memory card.
NOTE:
Memory cards designed for other printers may not work with your printer.