Parallel Mode - Dell 2330d - Laser Printer B/W User Manual

On*
Off
PS Set the printer to automatically switch to PostScript emulation when a print
SmartSwitch job requires it, regardless of the default printer language.
On*
Off
NPA Mode Send print jobs to the printer and query printer status information at the
same time.
Off
On
Auto*
USB Buffer Assign a size to the USB input buffer.
Auto*
Disabled
3K to <maximum size allowed> (in 1K increments).
MAC Binary Configure the printer to process Macintosh binary PostScript emulation print
PS jobs.
Off
On
Auto*
USB With
ENA Address—Set the USB port ENA address
ENA
ENA Netmask—Set the USB port ENA Netmask
ENA Gateway—Set the USB port ENA Gateway
NOTE:
NOTE:
NOTE:
separately).
IPX Frame Allow the adapter to initiate conversations by setting the Ethernet value.
Ethernet Off
802.2
On*
Ethernet
802.3
Ethernet
Type II
Ethernet
SNAP
* Factory default setting

Parallel Mode

Mode Mode Main Menu
Parallel PCL SmartSwitch
PS SmartSwitch
NPA Mode
Parallel Buffer
4-field IP address (0.0.0.0*)
The settings are shown when an ENA is attached.
This is applicable only to Dell 3300 Wireless Print Adapter (Sold