Short Paper; Insufficient Memory To Support Resource Save Feature; Insufficient Memory To Collate Job - Dell 2330d - Laser Printer B/W User Manual

If the toner cartridge is not installed, install it.
If the toner cartridge is installed, remove it and install a new toner cartridge.
31 Defective Toner Cartridge
Remove and install a new toner cartridge.
32 Unsupported Toner Cartridge
Remove the specified toner cartridge, and then install a supported one.

34 Short Paper

Ensure that the paper you loaded is large enough.
Check for a paper jam.
To clear the message and continue printing, press the Back button
print correctly.
To cancel the print job, press the Cancel button

35 Insufficient Memory to Support Resource Save Feature

To ignore Resource Save and continue printing, press the Back button
To cancel the print job, press the Cancel button
To enable Resource Save after receiving this message, make sure the link buffers are set to Auto, and then exit the
menus to activate the link buffer changes. When Ready appears, enable Resource Save.
For more information on how to enable Resource Save, see
To prevent this error in the future, install additional memory.

37 Insufficient Memory to Collate Job

The printer memory does not have enough free space to collate the job.
Press the Back button
current job may not print correctly.
To cancel the current print job, press the Cancel button
To prevent this error in the future:
Install additional memory.
Simplify the job. Reduce the complexity of the page by reducing the amount of text or graphics on the page and
to print the portion of the job already stored and begin collating the rest of the print job. The
. The remaining pages of the print job may not
.
. The current job may not print correctly.
.
Setup Mode.
.