Making Calls From Redial List; Making Calls From Cid List; Muting The Mouthpiece; Find The Handset - Binatone BB3200 User Manual

To answer a call
1. When the handset rings:
and display shows "LINE IN USE"
Press
2. When you have finished the call, press
unit or charge pod .
Making calls from the redial list
RD to view the redial list
1. Press
/P
2. Scroll
or until you see the name and /or number of the person you want to call, then press
the number which you have selected
"LINE IN USE" .

Making calls from CID list

1. In idle mode, press or to enter the CID list, and then scroll
the name and/or number of the person you want to call.
, the number which you have selected automatically dials out and the
2. Press
display shows "LINE IN USE".

Muting the mouthpiece

OK
1. Press " " to mute the mouthpiece
While the mouthpiece is muted the person on the other end of the call can not hear you and
the display will show "MUTE" .
" again to un-mute the mouthpiece, and the handset shows "LINE IN USE"
OK
2. Press "

Find the Handset

You can locate the handset by pressing <PAGE> on the base station. All the handsets
registered to the base will produce the paging tone and show
can stop the paging by pressing <TALKON>/
on the base again.
Note: If there is an incoming call during paging, the phone will ring with the
incoming call instead of paging.

6. Phone Book/(Memory dialing)

You can store up to 150 numbers in each handset's Phone Book (memory). Each number
can have up to 20 digits, and you can store a name of up to 12 characters with the number.
(If you try to store more, the handset will give a brief warning tone and the extra letter/
number will not be saved in memory.)
Also, you can select a different ringer melody for each entry
subscribe to CID (see page 14).
How to enter characters ?
To enter characters you press the button where you
see the character e.g. if you want to insert the letter
you press , if you want to insert the letter B
once
twice and for "C" , three times etc. If you want to insert,
for the first "A" to stop flashing then insert the second
the key pad table overleaf for other characters. Press
and hold
to delete the whole text.
9
briefly or place the handset back on the base
automatically dials out and the display shows
or until you see
"PAGING" on the display. You
<TALK OFF> /<C> on any handset or <PAGE>
but this will only work if you
' '
A
' '
then you will have to wait
' AA '
"A". Press
for a space, or see
to delete single characters and press
Binatone Help Line - 0845 345 9677