Binatone BB3200 User Manual page 28

To set handset call barring function
You can set 4 numbers (up to 4 digits each) for call barring.
When the call barring is "ON", any numbers beginning with the programmed digits will not be
able to be dialled out, and the display will show "CALLS BARRED".
1. Press "PHONEBOOK"
à
OK
2. Press three times "HS SETTINGS"
à
3. Press
à "ALARM"
OK
4. Press six times "BARRING"
à
5. Press "PIN ?". Key in the PIN code (default 0000)
à
OK
(default setting : OFF)
"OFF"
6. Press à
OK
7. Press or to select "OFF" or "ON".
to confirm your selection. If you select "ON", the display will show "NUMBER 1".
8. Press
OK
(Note: if a number is already in that location it will be shown also on the bottom line.)
If you want to program (or change) the number to be barred in this location, press
and the cursor will flash on the bottom number line.
Key in the digits you want to program, using R/DEL if you want to delete digits, and then
press to confirm the number. The display will show the programmed entry.
OK
If you want to program another location, press
Press to select another location and program the number as described above.
OK
Press to go back to idle mode at any time.
To set handset default settings
This allows you to restore the handset to its default settings. The handset menu settings will
be returned to their initial default settings, and the CID and redial lists will be cleared.
The phonebook will not be changed.
1. Press
à
"PHONEBOOK"
OK
2. Press three times
à
"HS SETTINGS"
3. Press
à
"ALARM"
OK
4. Press
once à
"HS DEFAULT"
5. Press
"PIN ?" and key in the PIN code (default 0000)
à
OK
6. Press to confirm the default, and the handset display will reset, search for the base
OK
and then return to idle mode.
23
,
OK
or to scroll to NUMBER 1,2,3, or 4.
Binatone Help Line - 0845 345 9677