To Set Alarm; Making And Answering Calls - Binatone BB3200 User Manual

To set alarm

You can set an alarm function on the handset, to give an alert at a programmed time of
every day.
The alarm gives repeated beeps for 45 seconds, or until any handset button is pressed.
If the Snooze is set ON, this will be repeated about every 5 minutes for an hour, with the
alarm icon continuing to flash.
If the Snooze is set OFF, the alarm will sound for the 45 seconds only once.
Press à
1.
OK
Press 3 times, à
2.
Press à
3.
OK
4. Press
à
OK
Press
à
5.
6. Press à
OK
. Press
7 or once to change the hours.
Press to confirm, and the minutes will flash.
OK
Press or to change the minutes.
Press to confirm, and the display will show "SNOOZE ON".
OK
Press or to change between SNOOZE ON or OFF.
Press to confirm, and the display will return to the previous menu.
OK
8. When the alarm is set, the icon will appear on the top of display
Note: If you have set an alarm, it will ring on the time you have set
When it rings, you can switch it off by pressing any button of the handset, or you can place
the handset back down on the charge pod. If you don't switch it off the alarm tone will
continue for about 45 seconds.
If you want to disable the Alarm function, you have to re-enter the Alarm menu option and
select OFF.

5. Making and answering calls

To make calls
in the idle mode,
1. Key in the phone number
If you make a mistake, press"
.
To clear all digits, press
, and the display shows "LINE IN USE", the number will dial out, and then the
2.
Press
display will show the call timer.
3. If you wish to use the speakerphone press
the right top corner of the display.
appear in
4. When you have finished the call, press
or place the handset back on the base unit or charge pod.
"PHONEBOOK"
"HS SETTINGS"
"ALARM"
"OFF" (if no alarm is already set)
"ON"
"12-00" (for example) with the hours flashing.
" to clear digits one by one
again at any time and the
briefly.
icon will
8