Vacuflush Maintenance Kit; Ordering Parts; Toilet Model Identification; Pedestal And Pedal Cover Installation - Dometic 1000 Series Owner's Manual

VACUFLUSH MAINTENANCE KIT

The VacuFlush Maintenance Kit contains replace-
ment parts used in routine maintenance of Vacu-
Flush toilets. A "must" for those who cruise to re-
mote locations. The kit includes vacuum tester,
water valve, seal kit, duckbill valves (4) and an
owner's manual in a convenient storage container.

ORDERING PARTS

Dometic is ready to assist you in the event service is required. Before calling, please have the following informa-
tion available. Your cooperation in having this information ready is appreciated and allows us to better meet your
needs. Please refer to the Parts Distributor list on Page 23.
1. Toilet Model Number (See following section.)
2. Serial Number
3. Part Number, Description and Quantity (See Parts information.)

TOILET MODEL IDENTIFICATION

The above label is located on the toilet base and will show the model number and serial number. If label is not
available, please refer to the Dimensional Specifications section for toilet model identification.

PEDESTAL AND PEDAL COVER INSTALLATION

1. With the pedestal cover open, place the back half
against the side of the base opposite the flush lever.
Rotate the pedestal cover counterclockwise around the
back of the base, then move the front half into place.
2. Tall base unit only, secure with mounting screw.
For short base units, simply snap cover closed.
3. Slide pedal cover onto foot pedal rod.
4. Attach pedal cover side plate and secure with
two (2) mounting screws. For short base units,
secure front screw, then press foot pedal down
completely to secure second screw.
DOMETIC CORPORATION
P.O. BOX 38, 13128 STATE RT 226 (800) 321-9886
BIG PRAIRIE, OH 44611 USA
000
MODEL NO.
SERIAL NUMBER
000000
7
VacuFlush
Maintenance Kit
(item number 310228)
1
2
3
4