Page 1
Modification of this product can result in property damage. Dometic Corporation • Sanitation Systems 13128 State Rt 226, PO Box 38 Big Prairie, OH 44611 SeaLand Product Customer Service: 1-800-321-9886 (8:00 a.m. - 5:00 p.m. ET)
ORDERING PARTS Dometic is ready to assist you in the event service is required. Before calling, please have the following information available. Your cooperation in having this information ready is appreciated and allows us to better meet your needs.
IMPORTANT INFORMATION BEFORE OPERATION 1. Fill freshwater tank and add deodorant to holding tank through toilet bowl. 2. Make sure all guests understand the operation of the toilet system and the flushing instruction label is easy for guests to read. This label is located under the seat, and is easily read when the seat is raised.
OPERATING INSTRUCTIONS 1. Adding More Water To Toilet Bowl Pull up the handle until the desired water level is attained. To prevent overflowing the toilet, a timer inside the control module limits the amount of water that can be added. 2.
AUTOMATIC FLUSH OPERATION TIMING CHART Water Valve Low Refill Mid Refill High Refill Flush Valve Opening Time Held Open Closing Time Additional “Add Water” Time Allowance Water Valve Low Position Mid Position High Position Service Position PROPER CLEANING AND MAINTENANCE The Magnum Opus toilet should be cleaned regularly for maximum sanitation and operational efficiency.
Formaldehyde versus Non-Formaldehyde: Dometic manufactures both types of deodorants. Generally speaking, formaldehyde formulas control odor very effectively at all temperatures and with all degrees of water hardness. SeaLand Environment-Friendly brand, which is formaldehyde free, is similarly effective.
FLUSH MECHANISM COMPONENTS 1. To access base assembly components, remove decorative screw caps and unscrew four bolts that hold china toilet to floor. FLUSH HANDLE COMPONENTS (under Access Cover) Flush Flush Handle Switch Water Valve Flush Valve Motor Motor Drive Arm Base Assembly Cable 2.
TROUBLESHOOTING Important: Always turn off electrical power and water to the toilet for disassembly. Problem 1. Toilet emits odor (flush ball open). 2. Water will not stay in bowl. 3. Water leaks onto floor. 4. Toilet will not flush and water will not enter bowl.
TROUBLESHOOTING (cont’d) Problem 9. Water leaking from Water Valve. 10. Water will not enter toilet bowl when the Flush Handle is raised to add water. 11. Water Level Switch has no effect on water level in low or high positions. 12.
ELECTRICAL TROUBLESHOOTING A volt/ohmmeter (VOM) and the Magnum Opus Wiring schematic (page 12) may be required for this section. Caution: Portions of this section will require that power be applied to the toilet. Keep hands away from the flush ball, motor drive arm and rotor shaft to prevent personal injury during testing and troubleshooting. The Magnum Opus control module uses a microprocessor to provide all the automatic and timing functions.
Page 11
ELECTRICAL TROUBLESHOOTING ERROR CODE CORRECTIVE PROCEDURES Condition Mode Switch in SERVICE position. Valve Open Limit Switch problem. Valve Closed Limit Switch problem. Flush valve motor relay failure. TOILET OPERATION CORRECTIVE PROCEDURES Symptom: Toilet will not flush and water will not enter toilet bowl. •...
ELECTRICAL TROUBLESHOOTING TOILET OPERATION CORRECTIVE PROCEDURES (cont’d) Symptom: Water will not enter the bowl when the Flush Handle is raised to add water. • Place the Water Level Switch in "Low" position and flush toilet. Check status light LED 7 (Add Water) while lifting up the Flush Handle.
There is a strong, worldwide network to assist in servicing and maintaining your sanitation system. For the Authorized Service Center near you, please call from 8:00 a.m. to 5:00 p.m. (ET) Monday through Friday. You may also write us at Dometic Corp., P.O. Box 38, Big Prairie Ohio 44611. Telephone: 1 800-321-9886 U.S.A.
If this Dometic product is placed in commercial or business use, it will be warranted, to the original purchaser only, to be free of defects in material and workmanship for a period of ninety (90) days from the date of purchase.
Need help?
Do you have a question about the 3000 Series and is the answer not in the manual?
Questions and answers