Installing DIMMs
Before installing DIMMs, read and follow these guidelines for dual channel configuration.
NOTE
Performance Acceleration Technology (PAT) requires a processor with 800 MHz FSB frequency
and DDR400 memory.
Install a matched pair of DIMMs equal in speed, size, and technology (see Figure 8) in
DIMM 0 in both channels A and B.
If additional memory is to be used, then install another matched pair of DIMMs in DIMM 1 in
both channels A and B (see Figure 9).
NOTE
All other memory configurations will result in single channel memory operation.
Channel A
256 MB, 128 Mb, DDR400
Channel B
256 MB, 128 Mb, DDR400
Figure 8. Dual Configuration Example with Two DIMMs
Channel A
256 MB, 128 Mb, DDR400
512 MB, 256 Mb, DDR400
Channel B
256 MB, 128 Mb, DDR400
512 MB, 256 Mb, DDR400
Figure 9. Dual Configuration Example with Four DIMMs
Installing and Replacing Desktop Board Components
DIMM 0
DIMM 1
DIMM 0
DIMM 1
DIMM 0
DIMM 1
DIMM 0
DIMM 1
35