Jumper Blocks; Front Panel Audio Connector/Jumper Block; Locations Of The Jumper Blocks - Intel D815EEA2 Technical Product Specification

Intel Desktop Board D815EEA2/D815EPEA2 Technical Product Specification

2.9 Jumper Blocks

CAUTION
Do not move any jumpers with the power on. Always turn off the power and unplug the power cord
from the computer before changing a jumper setting. Otherwise, the board could be damaged.
Figure 17 shows the locations of the jumper blocks on the D815EEA2 and D815EPEA2 boards.
9 7 5
A
10 6
J6B2
3
B
J9G2
Item Description
A Front panel audio connector / jumper block
B BIOS Setup configuration jumper block

2.9.1 Front Panel Audio Connector/Jumper Block

The connector at location J6B2 has two functions:
With jumpers installed, the audio line out signals are routed to the back panel audio line out
connector.
With jumpers removed, the connector provides audio line out and mic in signals for front panel
audio connectors.
Table 51 describes the two configurations of this connector/jumper block.
CAUTION
Do not place jumpers on this block in any configuration other than the one described in Table 51.
Other jumper configurations are not supported and could damage the board.
82
3 1
4 2
1
Present only on D815EEA2 boards
Figure 17. Locations of the Jumper Blocks
Reference Designator
J6B2
J9G2
OM11781