License Plate Lamp; Fuse - HYOSUNG GV 250 EFI Owner's Manual

◉ ◉ LICENSE PLATE LAMP
1. Remove the three nuts at the seat tail
cover.
2. Remove the tail & brake lamp cover.
3. Push in the bulb, turn it to the counter-
clockwise, and pull it out.
4. After stick in the new lamp, assemble the
lens.
CAUTION
Overtightening the screws may cause
the lens to crack.
◉ ◉ FUSE
The fuse box is located behind the front
seat. If the engine suddenly stops while
running or any electrical system fails to
operate then the fuse must be checked.
In case a fuse blows there is 30A and 15A
for main spare fuse.
CAUTION
Never use other than specified 30A or
15A fuse.
Installing a fuse of incorrect rating may
seriously damage the electrical system.
You should consult your Hyosung
dealer or a qualified service mechanic
immediately.
61