Controls; Ignition Switch; Ignition Key - HYOSUNG RT125D Owner's Manual

CONTROLS

IGNITION SWITCH

The ignition switch has three positions :
◉ ◉ " " OFF" " POSITION
All electrical circuits are cut off.
The engine will not start. The key can be
removed.
◉ ◉ " " ON" " POSITION
The ignition circuit is completed and the
engine can now start. The key cannot be
removed from the ignition switch in this
position.
◉ ◉ " " LOCK" " POSITION
STEERING
LOCK
KEY
KEY
17
To lock the steering, turn the handlebar
all the way to the left. Push down the key to
the "OFF" position and turn it to the
"LOCK" position after come up again and
remove the key.
All electrical circuits are disconnected.
WARNING
Do not operate the ignition switch to
be in the "OFF" or "LOCK" position
while driving at one's pleasure.

IGNITION KEY

comes equipped with two ignition
keys.
Keep the spare key in a safe place.
Your motorcycle ignition keys are
stamped with an identifying number. This
number is used when making replacement
keys. Please write your key number in the
box provided for your future reference.
Key number :