Replacing The Hinge Cover; Keyboard - Dell 1526 - Inspiron - Laptop Owner's Manual

Replacing the Hinge Cover

1 Replace the media control buttons connector to the systemboard.
2 Insert the left edge of the hinge cover.
3 Press from left to right until the cover snaps into place.
4 Replace the two screws that secure the hinge cover from the battery bay.

Keyboard

For more information about the keyboard, see "Using the Keyboard and
Touchpad" on page 39.
CAUTION:
safety instructions in the Product Information Guide.
NOTICE:
grounding strap or by periodically touching an unpainted metal surface (such as a
connector on the back of the computer).
NOTICE:
battery from the battery bay before you begin working inside the computer.
140
Adding and Replacing Parts
1 hinge cover
Before you begin any of the procedures in this section, follow the
To avoid electrostatic discharge, ground yourself by using a wrist
To help prevent damage to the system board, you must remove the
2 scribe
1
2