4 Remove the M2 x 3-mm securing screw.
5 Remove the FCM.
2
Replacing the FCM
NOTICE:
card slot. Doing so may cause damage to your computer.
1 Insert the
connector labeled "FCM".
2 Press the other end of the
until the card clicks into place.
3 Replace the M2 x 3-mm securing screw.
150
Adding and Replacing Parts
1
1
FCM Card
Install the FCM in the WWAN slot. Do not install an FCM in the WLAN
connector at a 45-degree angle into the system board
FCM
2
M2 x 3-mm securing screw
down into the slot on the system board
FCM