IBM 72335LU - System x3850 M2 Installation Manual page 40

the configuration has changed. The Configuration/Setup Utility program starts
automatically so that you can save the new configuration settings. For more
information, see the section about configuring the server in the User's Guide on the
IBM System x Documentation CD.
Some optional devices have device drivers that you must install. See the
documentation that comes with each option for information about installing device
drivers.
The server can operate as a symmetric multiprocessing (SMP) server. You might
have to upgrade the operating system to support SMP. For more information, see
the section about using the ServerGuide Setup and Installation CD in the User's
Guide on the IBM System x Documentation CD and the operating-system
documentation.
If the server has a RAID configuration that uses an optional RAID controller and
you have installed or removed a hard disk drive, see the documentation that comes
with the RAID controller for information about reconfiguring the disk arrays.
If the server has a RAID configuration that uses the integrated SAS controller with
RAID capabilities and you have installed or removed a hard disk drive, you might
have to reconfigure the disk arrays.
For information about configuring the integrated Gigabit Ethernet controller, see the
User's Guide on the IBM System x Documentation CD.
28
IBM System x3850 M2 and System x3950 M2 Type 7141: Installation Guide