Table of Contents
Advertisement
Release latch
Attention:
When you move the memory card, do not allow it to touch any
components or structures inside the server.
5. Remove the memory card:
a. Slide the orange release latch to the unlocked position.
Attention:
To avoid loss of data, make sure that the memory port power
LED is off before you remove the memory card.
b. Open the retention levers on the top of the memory card.
c. While you hold the retention levers open, lift the memory card out of the
server.
6. Place the memory card on a flat, static-protective surface, with the DIMM
connectors facing up.
Attention:
To avoid breaking the DIMM retaining clips or damaging the
DIMM connectors, open and close the clips gently.
7. Open the retaining clip on each end of the DIMM connector.
8. Touch the static-protective package that contains the DIMM to any unpainted
metal surface on the server. Then, remove the DIMM from the package.
9. Turn the DIMM so that the DIMM keys align correctly with the slot.
Chapter 2. Installing optional devices
17
Hide quick links:
Advertisement
Table of Contents
