Installing SFP Modules
Figure 10: Switch Mounted on a DIN Rail
Installing SFP Modules
Installing an SFP or SFP+ Module
Before you begin
When installing SFP or SFP+ modules, follow these guidelines:
• Do not remove the dust plugs from the modules or the rubber caps from the fiber-optic cable until you
• To prevent ESD damage, follow your normal board and component handling procedures when connecting
Cisco Catalyst Micro Series Switch Hardware Installation Guide
40
are ready to connect the cable. The plugs and caps protect the module ports and cables from contamination
and ambient light.
cables to the switch and other devices.
Switch Installation