Symantec NORTON GHOST PERSONAL EDITION User Manual page 31

held in the source partition. On selecting OK, Norton Ghost displays
the final "Proceed with disk load?" question. This is the last chance to
back out.
5 Check the details displayed and ensure the correct options have
been selected. Do one of the following:
Select Yes to proceed with the disk cloning.
Norton Ghost creates the destination drive using the source image
file drive details. If you need to abort the process use Ctrl-C, but
be aware that this leaves the destination drive in an unknown
state.
Warning: Only select Yes if you are really sure you want to
proceed. The destination drive will be completely overwritten with
no chance of recovering any data.
Select No to return to the menu.
Note: Spanned and split image files are handled as outlined in the
image file management section. See
page 39.
6 When the disk image load is complete, reboot the machine.
Norton Disk Doctor, ScanDisk, or a similar utility can then be run
to verify the integrity of the destination drive.
Cloning disks
"Managing image files" on
31