Checking Tire Pressures; Checking Parking Brake; Checking V-Belts - Dixon ZTR34/968999564 Operator's Manual

Checking Tire Pressures

All four tires should have a pressure of
15 psi / 103 kPa /1 bar.
Checking the Parking Brake
Visually check that no damage is found on the lever,
linages, or switch belonging to the parking brake.
Perform a stand still test and check that there is a
braking action.
To adjust the parking brake, contact the Dixon service
workshop.
WARNING!
Faulty adjustment can cause
an accident.
WARNING!
The machine must be
standing absolutely still when
the park brake is engaged.
Checking the V-belts
Deck belt
Inspect every 50 hours of operation. Check for severe
cracking and large nicks.
NOTE: The belt will show some small cracks in
normal operation.
Belt tension is manually adjustable. Turn bolt on deck
eyebolt to adjustment tension.
NOTE: Belt deflection or movement should be
approximately ¼"(6mm) when measured at
midpoint between pulleys. Periodically inspect both
belt and idler systems.
MAINTENANCE
Remove dust
Parking brake engaged
Tension
Eyebolt
Adjusting belt tension
8009-181
8050-773
8050-773
41
-
English