Cisco AP541N-A-K9 Administration Manual page 60

4
Figure 15 Configuring Virtual Access Points
57
To configure multiple VAPs, click the VAP tab.
Table 11 describes the fields and configuration options on the VAP page.
Table 11 VAP Field Descriptions
Field Description
Enter the address for the primary global RADIUS server. By
RADIUS IP
Address default, each VAP uses the global RADIUS settings that you
define for the access point at the top of the VAP page.
When the first wireless client tries to authenticate with the
access point, the access point sends an authentication
request to the primary server. If the primary server responds
to the authentication request, the access point continues to
use this RADIUS server as the primary server, and
authentication requests are sent to the address you specify.
Cisco AP 541N Dual-band Single-radio Access Point Quick Start Guide
Modifying Virtual Access Point Settings
Wireless