Cisco AP541N-A-K9 Administration Manual page 108

5
105
Figure 21 Modifying SNMP Settings
Table 25 SNMP Settings
Field
SNMP
Enabled/Disabled
Description
You can specify the SNMP administrative mode on your
network. By default SNMP is disabled. To enable SNMP,
click Enabled. To disable SNMP, click
changing the mode, you must click Apply to save your
configuration changes.
NOTE: If you disable SNMP, all remaining fields on the
SNMP page are disabled. This is a global SNMP
parameter that applies to SNMPv1, SNMPv2c, and
SNMPv3.
Cisco AP 541N Dual-band Single-radio Access Point Quick Start Guide
Configuring SNMP on the Access Point
Disabled. After
SNMP