Cisco AP541N-A-K9 Administration Manual page 16

1
STEP 3
13
Figure 4 Getting Started Page
Update the Cisco AP 541N software with the latest version by clicking the Software
as shown in
Upgrade link,
Next, we recommend that you:
• Change the password by clicking Change Administrator Password.
• Configure the SSID and enable wireless security, by clicking Configure
Wireless Networks (SSIDs).
• Enable the wireless radio, by clicking Enable Wireless Radio.
• Assign a new static IP address to the access point if your network devices
are configured with static IP addresses, by clicking Set LAN IP Address.
Figure 4.
Cisco AP 541N Dual-band Single-radio Access Point Quick Start Guide
Getting Started
Connecting the Access Point to a PC