Bandwidth Utilization - Cisco AP541N-A-K9 Administration Manual

Wireless

Bandwidth Utilization

Bandwidth Utilization
Cisco AP 541N Dual-band Single-radio Access Point Quick Start Guide
You can set network utilization thresholds on the access point to maintain the
speed and performance of the wireless network as clients associate and
disassociate with the access point.
To configure load balancing and set limits and behavior to be triggered by a
specified utilization rate of the access point, click the Bandwidth Utilization tab
and update the fields shown in the following figure.
Figure 19 Configuring Bandwidth Utilization
Table 23 Bandwidth Utilization
Field Description
Enable or disable bandwidth utilization:
Bandwidth
Utilization
To enable bandwidth utilization this access point, click Enable.
To disable bandwidth utilization on this access point, click
Disable.
Provide the percentage of network bandwidth utilization
Maximum
Utilization allowed on the wireless radio before the access point stops
Threshold
accepting new client associations.
The default is 0, which means that all new associations are
allowed regardless of the utilization rate.
4
96