Cisco AP541N-A-K9 Administration Manual page 62

4
59
Table 11 VAP Field Descriptions
Field Description
You can enable or disable a configured network.
Enabled
If you disable the specified network, you lose the VLAN ID
you entered.
When a wireless client connects to the access point by using
VLAN ID
this VAP, the access point tags all traffic from the wireless
client with the VLAN ID you enter in this field unless you
enable the untagged VLAN ID or use a RADIUS server to
assign a wireless client to a VLAN. The range for the VLAN ID
is 1–4094.
If you use RADIUS-based authentication for clients, you can
optionally add the following attributes to the appropriate file
in the RADIUS or AAA server to configure a VLAN for the
client:
The RADIUS-assigned VLAN ID overrides the VLAN ID you
configure on the VAP page.
You configure the untagged and management VLAN IDs on
the Ethernet Settings page. For more information, see
Settings, page
• To enable the specified network, select the Enabled
option beside the appropriate VAP.
• To disable the specified network, clear the Enabled
option beside the appropriate VAP.
• Tunnel-Type
• Tunnel-Medium-Type
• Tunnel-Private-Group-ID
40.
Cisco AP 541N Dual-band Single-radio Access Point Quick Start Guide
Modifying Virtual Access Point Settings
Wireless
LAN