Chapter 3 Basic Configuration - Cisco AIR-BR350-A-K9 - Aironet 350 Wireless Bridge Hardware Installation Manual

Basic Configuration
This chapter describes interfaces you can use to initially configure your bridge with basic settings. You
can use a web-browser interface, a command-line interface through a terminal emulator or a Telnet
session, or a Simple Network Management Protocol (SNMP) application. Consult Chapter 2 in the Cisco
Aironet 350 Series Bridge Software Configuration Guide for SNMP instructions and for complete
descriptions of these interfaces.
This chapter includes the following sections:
Before You Start
•
Summary of Configuration Steps
•
Using the IP Setup Utility
•
Entering Basic Settings
•
Default Basic Settings
•
OL-1412-01
C H A P T E R
Cisco Aironet 350 Series Bridge Hardware Installation Guide
3
3-1