THUNDER TIGER MINI TITAN V2 - MANUAL 2 Instruction Manual page 11

Main Rotor-5 /
Bag B
No. Material No. Description
1 BK1502 HARDENED MAIN SHAFT
2 BK1086 SOCKET SCREW M2×14
3 HML2 M2 NUT
BK1086
SOCKET SCREW M2×14
M2×14
內六角半牙螺絲
HML2
M2 NUT
M2
螺帽
名稱
高強度主軸
M2×14
內六角半牙螺絲
M2
螺帽
Step 1 / 步驟一
1. Insert the main rotor head set into the Main Shaft. Note the end with a
hole of the Main Shaft has to insert into the Hub.
2. Line up the holes on the Main Shaft & Hub.
3. Insert the Socket Screw (M2 x 14, #2) through the Hub and apply a
drop of threadlocking to screw it with the Nut.
1. 將主軸穿過組裝完成的主旋翼頭組。
2. 對正主軸及固定座上孔位。
3. 以半牙內六角螺絲穿過固定座及主軸後，
套上螺帽並使用適量防鬆劑固定。
Note / 注意
The hole should point up.
請注意，有孔位的一端應朝上
Step 2 / 步驟二
Screw a second Nut with a drop of threadlocking to prevent the Socket Screw coming loose.
於固定螺帽外側再鎖上一顆螺帽，使用適量防鬆劑固定，防止鬆脫。
-5
Qty
1
1
2
(3)
(3) T22
-10-
(2)
T22
(1)